Preparing to paint a wall? Do not avoid the preparation work: A correctly keyed surface area makes all the distinction. This video demonstrates how making both painting and priming a snap.
FOLLOW THESE STEPS
1. Clean the walls
Utilizing a significant cellulose sponge and an option of water blended with a couple of drops of moderate dishwashing liquid, wash your walls to get rid of any grease, dust, and dirt.
2. Tape the trim
Usage blue painter's tape (not masking tape) to secure any locations you do not desire your paint to obtain on, such as trim, molding, doorknobs, window frames, and door frames: Run long strips of the tape simply inside the external edges of these locations. (The outer edges of the tape ought to lie precisely where the wall satisfies the trim, covering the parts of the trim that your roller or paintbrush may strike when you paint.).
3. Put guide into a tray.
Gather enough so that it practically fills the well towards the bottom of the plate without covering the tilted part of the tray where the ridges are.
4. Roll the guide onto the wall.
Run the roller up and down an area of the wall, using guide up until the area is totally covered. Continue till your wall is totally covered, the reapplying guide to the roller as required.
Suggestion: Follow the maker's drying guidelines, which you'll discover on the can, making sure the guide is entirely dry before using paint.
5. Paint the trim.
Keep using paint flush versus your taped trim, working it outside about 2 or 3 inches from the tape. Continue up until you have actually completed painting a slim swath along all of the taped locations.
6. Roll on paint in a "w" shape.
Fill a paint tray with paint; dip your roller into it, eliminating excess. Continue, including more paint to the roller as required, up until the entire wall is painted.
7. Get rid of the painter's tape.
Remove the tape while the paint is still damp to prevent unintentionally getting rid of any dried paint in addition to it.
Getting prepared to paint a wall? Keep using paint flush versus your taped trim, working it external about 2 or 3 inches from the tape. Fill a paint tray with paint; dip your roller into it, getting rid of excess. Roll the paint onto the wall in a 3-by-3-foot "w" shape. Continue, including more paint to the roller as required, up until the entire wall is painted.